This application will allow a mobile boarding pass to be shown on your device, even if your airline doesn't support smartwatches. When you arrive at the airport, there will be a card on your watch, waiting for you at the gate to board your plane.

This technology is quite new to airlines and even the best of the best haven't quite got it nailed down yet. You can do it with the power of your own two fingers, any Aztec/PDF417/QR boarding pass and, the very approximate location of the airport.

The user will set the location and boarding pass information using two very renowned programs called "AutoLocation" that will help you set these "geofences" then, scan (or take a screenshot and import) the boarding passes in "

Wear Codes

". The day of the flight, your Geofence monitor activates, when you arrive at the airport, the card is shown to scan at the gate.

The instructions are quite simple:

-Install and run

Wear Boarding for Android Wear

-Install the required programs (mentioned above, but will auto-install once you run this app)

In AutoLocation:

-Manage Geofences

-Press the "+" symbol to add a geofence

-Enter the lattitude and longitude or airport address and press the magnifying glass at the end of the search line.

-Use the plus symbol in the map area to zoom in. The airport should be visible.

-Click on somewhere near the airport, a blue dot will appear

-On the blue slider below the map, engulf the entire airport area in the lightly shaded area.

-If the lightly shaded area doesn't cover the entire airport when you slide the slider all the way to the right, press the down icon at the end of the slider and enter a figure such as 1000.

-After the airport area is totally engulfed in the shaded area, press "Accept Geofence" and name it "Airport 1"

Repeat this process for each airport you'll be boarding another airplane on and make sure to change the name by adding 1 to each new airport (e.g. Airport 2)

In Wear Codes:

Option 1:

-Take a screenshot of your boarding pass on your airline's mobile app.

-View this picture in your favorite picture viewer

-Share this picture with "Wear Codes" with the share icon (3 trianglular lines with a dot on each axis)

-Wear Codes may import it without a crop, or will ask you to encapsulate the code in a box.

-Name this code "Airport 1" and, if you are in the US, use the dropdown box to select Aztec (if it isn't already)

-Save this by pressing on the check mark near the top of the screen.

Repeat this process for each boarding pass, add 1 to each code (e.g. Airport 2)

Option 2:

-Display the printed boarding pass on a computer monitor

-Open Wear Codes

-Press the "+" button.

-Press "Scan a code"

-Aim your camera at the bar code and it will accept it when it fully reads it.

-Name your code "Airport 1"

-Press the dropdown to convert your code from PDF417 to Aztec.

-Press the checkmark on the top to accept the code.

Repeat this process for each boarding pass, add 1 to each code (e.g. Airport 2)

Finally, run this program to specify your flight dates.. After this, you'll be all set.

Support for frequent flyers:

To avoid redoing geofences, you can now name your frequent airports and boarding passes with a naming scheme such as:

DAB-Airport 1

DAB - Airport 1

DAB- Airport 1

DAB -Airport 1

Or:

Airport 1- DAB

Airport 1 -DAB

Airport 1-DAB

Airport 1 - DAB

You can use airport codes, airport names, whatever you choose.

Just remember, each airport geofence references the same boarding pass. Name them alike, you'll be able to fly the skies without the need to expose your pattern or pin!

此应用程序将允许移动登机牌将您的设备上显示，即使您的航空公司不支持smartwatches。当你到达机场，会有对你的手表卡，在门口等你登上你的飞机。

这项技术是很新的航空公司，甚至最好的最好的还没有完全得到它明确了呢。你可以用自己的两个手指的力量，任何阿兹台克/ PDF417 / QR登机牌，机场的非常近似位置做到这一点。

用户将设置位置和登机牌，使用两个名为“自动处所”非常著名的项目，将帮助您设置这些“geofences”然后，扫描信息（或采取截图和进口）的登机牌“的

磨损码

”。飞行的一天，你的地理栅栏显示器激活，当你到达机场后，该卡显示在大门口进行扫描。

该指令是非常简单的：

- 安装并运行

穿登机的Andr​​oid Wear

- 安装所需的程序（上面提到的，但会自动安装，一旦运行这个程序）

在自动处所：

- 管理Geofences

- 按“+”符号来添加地理栅栏

- 输入lattitude和经度或机场地址并按下放大镜在检索线的末端。

- 使用在地图区域的加号放大。机场应该是可见的。

上单击鼠标右键，在机场附近的某个地方，一个蓝点会出现

-on的蓝色滚动地图下方，席卷整个机场区域在浅色阴影区域。

- 如果轻轻阴影区没有覆盖整个机场，当你滑动滑块一路到右侧，按向下图标滑块的结束，并进入一个数字，如1000。

-After机场区域的阴影区域完全吞没，按“地理栅栏接受”并将其命名为“机场1”

重复此过程的每个机场，你会在登上另一架飞机，并确保通过添加1到每个新机场改名字（例如机场2）

磨损代码：

选项​​1：

-Take登机截图传给你的航空公司的移动应用程序。

- 查看这张照片在你喜欢的图片查看器

-share这幅画与“穿代码”的共享图标（3 trianglular线，每个轴的点）

-Wear代码能够导入它没有作物，或会要求你封装代码在一个盒子里。

-name此代码“机场1”，如果你是在美国，使用下拉框选择阿兹台克人（如果没有的话）

通过按靠近屏幕顶部的复选标记-SAVE此。

重复此过程对于每个登机牌，加1到每个代码（例如机场2）

选项​​2：

- 显示打印的登机牌在计算机显示器上

- 开放磨损代码

- 按“+”按钮。

- 按“扫描码”

-Aim相机的条形码，它会接受它时，它完全读取它。

-name代码“机场1”

- 按下拉到您的代码转换为PDF417阿兹台克人。

- 按顶部的复选标记以接受的代码。

重复此过程对于每个登机牌，加1到每个代码（例如机场2）

最后，运行此程序，以指定航班日期..在此之后，您将所有设置。

支持飞行常客：

为了避免重做geofences，你现在可以命名你频繁的机场和登机牌用的命名方案，如：

DAB-1机场

DAB - 机场1

DAB-机场1

DAB - 机场1

或：

机场1- DAB

机场1 -Dab

机场1-DAB

机场1 - DAB

您可以使用机场代码，机场的名字，不管你选择。

只要记住，每个机场地理围栏引用相同的登机牌。他们的名字一样，你就可以飞上了天空，而不需要暴露你的图案或脚！