Wear Air Cam is an Android Wear application. With Wear Air Cam, you can remotely control your phone or tablet's camera and broadcast it to any of your Android Wear powered devices.

Usage examples:

• Baby care

• House security

• Remote control of your phone's camera (include yourself in pictures and group photos!)

• Look in tight spaces (like behind furnitures, under the sink, in your car's engine, ...)

Feature list:

• See your phone or tablet camera as a video stream on your Wear device.

• Take photos with a single tap on your Wear device screen. You can choose the size of the pictures for both back and front-facing cameras.

• Record videos. Long press on your Wear device screen to start recording. A timer will let you know for how long you've been recording so far. Long press again to end recording.

• Record your phone/tablet's microphone. Recording is also remotely triggered from your Android Wear device.

• Control your phone/tablet's camera hardware from your Wear device (switch between back and front camera, zoom in or out and change flash mode.)

• Remotely start video streaming from your Wear device. This will work if your phone or tablet is turned off, but only if it has been allowed in the device settings. If the display is turned on, the capture will shows itself in a floating window that does not cover all the display.

• Choose between broadcasting the whole (scaled down) picture, or a cropped portion of it to benefit the most of your Wear device's screen real estate.

• Auto-adaptive video stream to use the most of the Bluetooth connection between your devices

• Many other settings like video quality, compression algorithm, auto-focus, picture resolution, real-time transmission status, ...

Wear Air Cam has been fully tested with the following Android Wear powered devices : Motorola Moto 360 & LG G Watch, but is intended to work with all kinds of devices.

Have fun with Wear Air Cam, and let us know what do you think of it, and what you would like to see in the future !

佩戴空气凸轮是Android Wear应用程序。随着佩戴空气凸轮，您可以远程控制你的手机或平板电脑的摄像头和广播给您的任何Android Wear供电设备。

使用示例：

•婴儿护理

•内部安全

•您手机的摄像头的遥控器（包括自己的照片和合影！）

•寻找在狭小的空间（如背后家具，水槽下，在你的汽车的发动机，...）

功能列表：

•请参阅您的手机或平板电脑摄像头为您的磨损设备上的视频流。

•拍摄照片与你的服装设备屏幕上一个水龙头。可以选择的图像为正面和背面的摄影机的尺寸。

•录制视频。长按您的磨损设备屏幕上开始录制。计时器将让你知道多长时间你一直在录制至今。再次长按结束录制。

•记录你的手机/平板电脑的麦克风。录音也远离您的Andr​​oid Wear设备触发。

•从磨损设备控制您的手机/平板电脑的摄像头硬件（背部和前置摄像头，放大或缩小，改变闪光模式之间切换。）

•远程启动视频从您的设备磨损流。这会，如果你的手机或平板电脑被关闭，但只有当它在设备设置被允许工作。如果显示器被接通时，在捕获的意愿表示本身在一浮动窗口，这并不包括所有的显示。

•广播整个（缩小）的图片，或它的裁剪部分，以造福于大部分的磨损设备的屏幕地产之间进行选择。

•自动自适应视频流使用最多的设备之间的蓝牙连接的

•许多其它设置，如视频质量，压缩算法，自动对焦，图像分辨率，实时传输状态，...

佩戴空气凸轮已经完全与以下Android Wear供电设备进行测试：摩托罗拉摩托360 LG摹关注，但旨在与各种设备的工作。

有乐趣佩戴空气凸轮，并让我们知道你怎么想起来了，你想看到什么未来！