An interval timer that you can run on your smartwatch as a watchface. Use your smartwatch as normal (see time of day, receive notifications, send text etc.) while running the interval timer. Get sound and/or vibration notifications on intervals change, so you don't need to look at the watch.

TimeWear AT A GLANCE:

- runs on a smartwatch as a watchface;

- tactile feedback: your watch vibrates when intervals change;

- audio feedback: your watch play sounds when intervals change;

- configure preset name, interval names, times and vibration patterns on your phone and save them all on your watch;

- make a quick preset adjustment right on your watch: change interval times, vibration patterns and color;

- customize this timer to your needs - seven types of intervals available: warm up and cool-down, plus up to five repeatable intervals;

- no need to have your watch paired up with your phone to run your timer;

- pause / resume / restart your timer right from your watch;

- each interval is color coded;

- see interval name, interval countdown time, total time remaining and number of rounds on your watch;

- see time of day while running your timer;

- choose your color coding for each preset's intervals;

- select your presets right from your watch.

HOW TO USE

- after the timer app is installed, find it in a list of watchfaces under Android Wear app. The timer will be installed on your watch automatically, once it is paired up with your phone. Note that it'll take about 30 seconds for the timer to appear in a watchfaces list; you might need to disconnect and reconnect your watch;

- to run the timer, select it as a watchface from your phone in Android Wear app or right on your watch. The timer will start running as soon as you select it;

- to configure the timer, go to Android Wear app and select 'Settings' for the timer's watchface;

- to configure vibration or sound for each interval, select number of vibration pulses from 1 to 5. To disable vibration for the interval, select number 0;

- to hear sound notifications, a bluetooth headset needs to be pair up with a watch;

- once you save timer's preset, it will be sent to your watch and you can start using it. No need to have the phone paired up after that, so you can leave your phone behind, when going to a gym;

- to pause / resume the timer, tap your finger in the middle of your watch's screen;

- to enter a configuration menu triple tap on your watch's screen. In that menu you will be able to restart the timer, select a different preset or edit current preset;

- to temporarily disable timer vibration, select 'Mute' in your watch configuration;

- to uninstall the timer, go to the App manager and uninstall it from there. This app will not show in the list of apps, as it is implemented as a watchface.

COMPATIBILITY

This app works on any device running Android Wear. It was thoroughly tested on the Moto360 and Samsung Gear Live watches paired up with Samsung Galaxy S4 and Moto G phones and Nexus 10 tablet.

Please, provide your feedback. We will make every effort to address your concerns or suggestions. Contact us via email: info@ayratio.com

一个间隔定时器，你可以在你的SmartWatch作为watchface运行。用你的SmartWatch正常（见天的时间，接收通知，发短信等），同时运行的间隔定时器。坐上区间变化的声音和/或振动的通知，所以你并不需要看手表。

TimeWear AT一览：

- 运行在的SmartWatch作为watchface;

- 触觉反馈：您的手表时，振动的时间间隔改变;

- 音频反馈：您的手表播放声音时的时间间隔改变;

- 您的手机上配置的预设名称，时间间隔的名称，时间和振动模式，并将其保存所有有关你的手表;

- 做一个快速的预设调整就在您的手表：改变间隔时间，振动图案和颜色;

- 自定义此定时器您的需求 - 七类可用间隔：热身和降温，再加上多达五个重复的间隔时间;

- 没有必要有你的手表配对与您的手机运行的定时器;

- 暂停/恢复/从你的手表重新启动定时器;

- 每一个间隔颜色编码;

- 看区间的名字，间隔倒数时间，剩余和轮对你的手表数量总时间;

- 看到在运行您的计时器一天中的时间;

- 选择你的颜色编码每个预设的时间间隔;

- 从您的手表选择您的预设。

如何使用

- 安装计时器应用程序后，发现它在下Android Wear应用watchfaces的列表。计时器会在你的手表自动安装，一旦配对与您的手机。请注意，这将需要大约30秒出现在watchfaces列表中的定时器;您可能需要断开并重新连接你的手表;

- 运行定时器，选择它作为您的手机在Android Wear应用程序或就在您的手表watchface。定时器将开始只要您选择它运行;

- 将定时器配置，进入Android Wear应用，然后选择“设置”定时器的watchface;

- 配置振动或声音的每个区间中，选择振动脉冲数从1到5要禁用振动的间隔，选择数0;

- 听到声音通知，蓝牙耳机需要在配对用表;

- 一旦你保存定时器的预设，它会被发送到你的手表，你可以开始使用它。不需要有后配对的电话，这样你就可以去健身房的时候留下电话的背后，;

- 暂停/恢复定时器，挖掘你的手指在手表的屏幕中间;

- 进入设置菜单枪王之王手表的屏幕上。在这个菜单中，你将可以重新启动定时器，选择不同的预设或编辑现有预设;

- 暂时禁止定时器震动，在你的手表配置选择“静音”;

- 要卸载的计时器，转到应用程序管理器，并从那里卸载它。这个应用程序将不会在应用程序列表中出现，因为它是实现为watchface。

兼容性

这个应用程序适用于运行Android Wear任何设备。它是彻底的Moto360和三星齿轮直播手表搭配了三星Galaxy S4和摩托3G手机和Nexus 10平板电脑进行测试。

请提供您的反馈意见。我们将尽一切努力解决您的问题或建议。通过电子邮件与我们联系：info@ayratio.com