INTERACTIVE DIGITAL WATCH FACE with these features:

- Time

- Date

- Month

- Year

- Watch battery indicator

- Heart Rate monitor

- Stopwatch (1 second resolution)

- Interval timer (hours and minutes with 1 second resolution)

- Interval timer notifications - watch vibrates and/or beeps at half way / 1 minute before the end / end of interval (to hear sound notifications, a bluetooth headphones paired up with the watch are required)

- Watch face configurable colors

Watch settings - FROM A HANDHELD:

- Battery indicator on/off

- Heart Rate monitor on/off

- Include Year in Date on/off

- 24 Hours Format on/off

- Watch face color

- Interval timer notifications

Watch settings - ON THE WATCH:

- Watch face color selection from a list

- Start / pause / cancel both timers simultaneously or separately

- Select timer's interval in hours and minutes

- Select one time / repeat interval timer option

HOW TO USE:

- double-tap on the stopwatch capsule to start / pause / cancel the stopwatch

- double-tap on the interval timer capsule to start / pause / cancel the timer, plus select the timer interval and "one time / repeat" option

- double-tap on the clock capsule to start / pause / cancel both timers simultaneously. When timers are in different states (e.g. one is running, the other is paused), only Cancel function is available. Swipe to the left to configure the one shot timer by time of day

- double-tap anywhere on the screen outside of capsules to select a watch face color from a list.

HEART RATE MONITOR:

Starting from release 1.0.5, heart rate monitor, if enabled, will use the heart rate sensor only once every 5 minutes, turning it on for about 30 seconds or less. The heart rate sensor will be off at all other times.

AMBIENT MODE AND INTERVAL TIMER NOTIFICATIONS:

Improving battery life was one of the design goals during development of this watch face. When a watch has ambient mode disabled, Moto 360 watch's battery will last with this watch face for over 24 hours with both timers running and timers will run at 1 second resolution. However, ambient mode is much harder on battery. To increase battery life in ambient mode, this watch face's interval timer notifications switch to 1 minute resolution. This means that timer notifications (half way, 1 minute and interval end notifications) will happen between 0 to 59 seconds after a notification point, depending on the moment when the timer was started.

COMPATIBILITY:

This app works on any device running Android Wear. It was thoroughly tested on the Moto360 and Samsung Gear Live watches paired up with Samsung Galaxy and Moto G phones and Nexus 10 tablet.

CONTACTS:

Contact us via email: info@ayratio.com. We will make every effort to address your concerns or suggestions.

交互式数字表盘具有以下功能：

- 时间

- 日期

- 月

- 年

- 手表电池指示灯

- 心率监测器

- 秒表（1秒分辨率）

- 间隔定时器（小时，以1秒的分辨率分钟）

- 间隔定时器通知 - 在间隔结束/结束前半路上/1分钟观看振动和/或蜂鸣声（听到声音通知，配对使用是必需手表蓝牙耳机）

- 表盘颜色配置

手表设置 - 从手持：

- 开启/关闭电池指示灯

- 开/关心率监测器

- 在打开/关闭日期包括年

- 开/关24小时制

- 手表表面颜色

- 间隔计时器通知

手表设置 - 关于手表：

- 从列表中观察面部的颜色选择

- 开始/暂停/同时或单独取消两个定时器

- 选择计时器的小时和分钟间隔

- 选择一个时间/重复间隔定时器选项

如何使用：

- 关于秒表胶囊双击启动/暂停/取消秒表

- 在间隔定时器胶囊双击启动/暂停/取消计时器，加上选择计时器的时间间隔和“一时间/重复”选项

- 在时钟胶囊双击启动/暂停/取消同时两个定时器。当计时器在不同状态（例如，一个正在运行，另一种是暂停），只有取消功能可用。向左滑动，一天的时间来配置单次定时器

- 双击屏幕上的胶囊以外的任何地方从列表中选择一个表盘的颜色。

心率监测：

从版本1.0.5，心脏监测仪开始，如果启用，将使用心脏速率传感器只有一次，每5分钟，把它打开，约30秒或更少。该心脏速率传感器将在所有其他时间关闭。

AMBIENT模式和间隔定时器声明：

提高电池的寿命是这款腕表面对发展过程中的设计目标之一。当手表的环境模式无效，摩托360手表的电池将持续这个表盘与两个定时器运行和定时器会以1秒的分辨率下运行超过24小时。然而，微光模式是电池更难。为了提高电池寿命的环境模式，这种手表表面的间隔计时器通知切换到1分钟的分辨率。这意味着，计时器通知（半路上，1分钟，间隔结束通知）将定时器启动时的通知后点0到59秒之间发生，取决于时刻。

兼容性：

这个应用程序的工作原理运行Android Wear任何设备上。它被彻底的配对与三星Galaxy和摩托3G手机和Nexus 10平板电脑Moto360和三星齿轮直播表测试。

联系方式：

通过电子邮件与我们联系：info@ayratio.com。我们将尽一切努力解决您的问题或建议。