Do you find your smartwatch's built-in backlight timeout period actually quite short? Wouldn’t it be nice if you could adjust the backlight timeout to have the screen stay on a little longer? (So that not only you, but also your friends can marvel at that new watchface you just installed...)

StayLit Wear lets you adjust the time that the light stays on after the watch has been waked. You can select a value for how much time will elapse from the moment that the watch has been waked from dim mode (i.e. by having tapped the screen, moved the watch, or pressed the button) to it being allowed to revert to dim mode again. Choose from a range of values of up to 5 minutes, or until you switch the screen off again.

NEW: “indefinitely+” mode: the light stays on until you switch it off, but is also switched off when you lower your arm or turn the watch away from you. That way, the light will be on exactly when you need it. (Note that also in this mode, StayLit respects the individual light timeout of apps like Google Fit, Maps, or Runtastic.)

USAGE: After installing the app on your phone, please allow approx. 30 seconds for the app to be pushed to your watch. In order to adjust the backlight timeout, open the StayLit Wear app on your watch. This will bring up the Longer Backlight settings. Select a setting in the list by tapping on it. Deactivate StayLit Wear by selecting "off“ in this list.

NOTE: Due to an issue with Android Wear 5.1, on some devices, it may be necessary to re-select the desired screen timeout each time you change the watchface. Note also that StayLit may interfere with the settings menu of the Moto 360's "Dials" watchface.

INSTALLATION TROUBLESHOOTING: After having been installed on the phone, StayLit should show up in the phone's app drawer. On the watch, the app should show up in the app menu (accessible through long pressing the watch's power button). If it still isn't showing on the watch after several minutes, try the "resync apps" option in the Android Wear app on the phone (Settings > Device settings > Resync apps). Also, make sure that you have the latest version of the Android Wear app installed on your phone. If you are having problems installing or running the app, please contact me - I will be happy to help!

NOTE: Setting a significantly longer screen timeout will reduce battery life. We recommend setting a value of 10 - 30 seconds...

你是否发现你的智能手表内置的背光超时时间其实很短？那岂不是很好，如果你能调整背光超时会对稍长画面停留时间？ （这样不仅你，还有你的朋友可以在你刚安装新的表盘惊叹...）

StayLit磨损，您可以调整手表已经被唤醒后，光停留的时间。您可以选择多少时间就会从目前经过手表已经从朦胧的睡眠模式唤醒一个值（有点击屏幕，即，移动观看，或者按下按钮）将其被允许故态复萌暗淡模式。从一系列长达5分钟，或者直到你再次切换屏幕关闭的价值观。

新：“下去+”模式：指示灯一直亮着，直到将其关闭，但也关掉，当你降低你的手臂或从你把手表了。这样的话，光会在什么时候你需要它。 （请注意，也是在这种模式下，StayLit尊重像谷歌飞度，地图，或透过Runtastic应用程序的各个光超时）。

用途：安装在手机上的应用程序后，请允许约。对于应用程序30秒推送到你的手表。为了调节背光超时，打开StayLit戴在你的手表应用程序。这将调出较长的背光设置。通过点击它在列表中选择一个设置。停用StayLit磨损通过在这个列表中选择“关闭”。

注：由于与Android的问题佩戴5.1，在某些设备上，可能有必要重新选择想要的屏幕超时每次更改表盘的时间。还要注意StayLit可能与摩托360的“拨号”表盘的设置菜单干扰。

安装故障排除：已安装在手机上后，StayLit应在手机上的应用抽屉里显示出来。在手表，应用程序应该在应用程序菜单（通过长按手表上的电源按钮访问）显示出来。如果仍无法对腕表呈现几分钟后，尝试在手机（设置>设备设置>应用再同步）上的Android Wear应用中的“重新同步应用程序”选项。此外，请确保您有最新版本的手机上安装Android Wear应用的。如果您在安装或运行应用程序的问题，请与我联系 - 我会很乐意提供帮助！

注：设置显著较长屏幕超时会降低电池寿命。我们建议设置值为10 - 30秒...