Android Wear Center
Run a' Wear is an app for your Android Wear smartwatch which recognizes your activity - walking, running or rest - in a
standalone
mode: no need to carry a phone with you while exercising.
Google Fit
integration is included.
After you give the app permission to access Google Fit, it will upload your exercise data to Google Fit automatically. Check the phone app's Help in the
Google Fit Integration
area for more information on how this works.
Run a' Wear displays on your Android Wear watch:
☆ Time since start of activity (stopwatch or countdown)
☆ Number of steps
☆ Distance (in km or miles)
☆ Calories expended
☆ Heart Rate
☆ Accuracy of Heart Rate measurement
☆ Heart Rate as percentage of Maximal Heart Rate
☆ Heart Rate training zone (5 zones)
☆ Current time
How it works
After the installation of the app finished - and you see the app icon both on the watch and on the phone - create a profile on the phone (see below). Then, open the app on the watch. You should now see the
Start screen
which allows you to choose a profile (by swiping up / down) or start a session by swiping to the left.
The app on the watch will try to recognize your activity based on what you did in the previous 10 seconds. Thus, if you suddenly change from 'walking' to 'running', there is a delay of 10 seconds until the watch recognizes that you are not walking any more but running. The distance that you walked or ran is then estimated based on your current activity and the step lengths that you have specified for the profile you are currently using.
The app on the phone gives further information about different calculations used (like the equation for determining Maximal Heart Rate or the calorie calculation).
Creating a profile
Run a' Wear has to be configured on the phone (but then can be used without the phone). You can create several profiles, varying a number of features like walking / running step length, age, gender. etc.
After you filled out the profile details in the phone app, tap the SAVE button (while the watch is near to you). This will transfer the profile to the watch.
Actions on the watch
The watch has three screens: (1) Configuration request screen (this is shown only if you haven't created at least one profile yet), (2) Start screen, (3) Main screen.
The
Configuration request screen
is just a screen telling you that you need to create a profile before the app on the watch can be used.
The
Start screen
has these actions available:
☆ Swipe left to open the Main screen
☆ Swipe right to exit from the app
☆ Swipe up / down to select a profile (in case you have created more than one profiles)
The
Main screen
has these actions available:
☆ Long press: brings up the 'exit' button
☆ Single tap: when in 'dimmed' mode, brings up 'normal mode' for 30 sec, with full colors and seconds in timing display
☆ Double tap: when in 'Stopwatch' mode, pauses the stopwatch, step counter and calorie counter
☆ Double tap (while 'Stopwatch' is paused): restarts the stopwatch, step counter and calorie counter
Compatible devices
☆ Phone: Android 4.3 and higher
☆ Watch: for Android Wear, with Heart Rate sensor included (like, for example, LG G Watch R or Moto 360)
Limitations
The accuracy of Heart Rate measurement strongly depends on the watch on which the app is installed: on some watches, an accurate measurement is possible only if you are not moving.
Contact
Please write email to avoimasoftware@gmail.com with any questions, comments or problems regarding the app - or leave a comment here.
Credits
☆ The 'glossy silver walker' in the Run a' Wear icon is based on an icon found at http://icons.mysitemyway.com/
运行“磨损是你的Android Wear的SmartWatch，承认你的活动一个应用程序 - 散步，跑步或休息 - 在
独立的模式：无需携带手机与你同时锻炼。
的
谷歌拟合的集成是包括在内。
之后你给应用程序的权限来访问谷歌飞度，它会自动上传你的运动数据，谷歌飞度。检查手机应用程序的帮助在
谷歌整合飞度的区域上如何工作的详细信息。
运行“穿显示在你的Android Wear手表：
☆由于时间的活动启动（秒表倒计时或）
☆步数
☆距离（公里或英里）
☆消耗卡路里
☆心率
☆心率测量精度
☆心率为最大心率的百分比
☆心率训练区（5区）
☆当前时间
如何它的工作原理
之后，应用程序的安装完了 - 你看无论是在手表和手机上的应用程序图标 - 打造手机上的一个配置文件（见下文）。然后，打开腕表上的应用程序。您现在应该看到的
启动屏幕，它允许您选择一个配置文件（通过刷卡上/下）或通过刷卡向左启动会话。
腕表上的应用程序会尝试根据您在最后10秒做了什么，认识到你的活动。因此，如果你突然从“走”到“跑”的变化，有10秒钟的延迟，直到手表承认，你不走任何更多，但运行。然后估计你步行或跑步的距离根据您当前的活动和步骤长度您为当前正在使用的配置文件中指定。
在手机上的应用程序提供了有关使用（如方程确定最大心率或热量计算）不同的计算方法的进一步信息。
创建一个配置文件
运行'磨损，必须在手机上配置（但是随后可以在没有电话使用）。您可以创建多个配置文件，改变了许多功能，如散步/跑步步长，年龄，性别。等等
当您在手机应用程序填写了个人资料的详细信息，请点击Save按钮（而手表是靠近你）。这将在形状转印到手表。
标签上的手表操作
这款手表有三个屏幕：（1）配置请求画面（这仅显示如果您尚未创建至少一个的个人资料），（2）启动画面，（3）主屏幕。
在
配置请求画面的只是一个屏幕告诉你，你需要创建一个配置文件可以用在手表的应用程序之前。
在
启动屏幕有这些动作可供选择：
☆刷卡左边打开主屏幕
☆向右滑动，以从应用程序退出
☆刷卡向上/向下选择一个配置文件（如果你已经创建了多个配置文件）
在
主屏幕有这些动作可供选择：
☆长按：调出“退出”按钮
☆单一的水龙头：当“变暗”模式，带来了“正常模式”30秒，以饱满的色彩和秒计时显示器
☆枪王：当“秒表”模式，暂停秒表，步数和卡路里计数器
☆枪王（而“秒表”暂停）：重新启动秒表，步数和卡路里计数器
兼容手机
☆电话：安卓4.3及以上
☆看点：对于Android Wear，与心率传感器包括（如，例如，LG摹观看R或摩托360）
限制
心率测量的精确度在很大程度上取决于在其上的应用程序安装在手表：在一些手表，精确的测量是可能只有当你不动。
联系人
请写email给avoimasoftware@gmail.com提供有关应用程序的任何疑问，意见或问题 - 或在此留下评论。
现金
☆在运行'白银光泽学步车'一'磨损的图标是基于在http://icons.mysitemyway.com/发现了一个图标
