* Please contact me if you have any issues rather than leaving a negative review *

This software is for the IP Power 9258 / 9222 / 9223 / 9255 / 9212 / 9280 / 9820 / 9858 / 9216 range of Aviosys network controlled power strips (PDU's). You can power on or off an unlimited number of devices remotely from anywhere in the world using your Android mobile or smart watch, schedule events for the devices to turn themselves on and off, or power cycle a device such as a router or server to reboot it.

The various available Aviosys IP power strips are here: http://bit.ly/10qUS9n

There is a full user manual here: http://bit.ly/1a9oM5G

NOTE: to access the menus in PowerIP use your phone's menu button or press the three dots on the screen. See section 13.11 of the manual if you're not sure where to find it.

Possible applications for PowerIP are:

- rebooting or power cycling a server or router by remote control if it has crashed

- turning your computer on or off when you are out so that you can use it remotely

- remote control security lights to turn them on or off when you are out

- remote control heating systems

- using your Aviosys power strip as a remotely programmable time switch

- home automation applications

- power off your devices to save energy rather than leaving them on standby

- monitoring equipment (with the 9212 Delux)

- controlling equipment based on events such as ambient light, timers, location (using Tasker, available separately)

Features:

- remote control as many power strips as you like (including the 1, 4 and 8-port variants of the Aviosys power strips/switches)

- run macros to control your equipment

- Android Wear support

- give each power strip a nickname

- user definable names for each of the controllable outputs

- get output names from the power strip during setup to save yourself having to type them in

- group your frequently used equipment onto a favourites screen

- create shortcuts on your home screen

- get and set schedules on the power strips themselves to switch devices on or off automatically at preset times

- power cycle an output using a specified delay

- read the status of the inputs on the 9212 Delux

- monitor temperature and current

- password protect your settings

- "protect" individual power outputs to prevent a user from accidentally powering off important equipment

- “protect” power outputs so that certain users cannot control them at all

- import/export server settings for easy deployment across multiple devices

- integration with other apps using Android intents

It's easy to set up. Just go into the server configuration menu and enter the user name, password, server address (an IP address or domain) and port for each of the power strips/switches. For the server address, you should not include "http", but instead just the address e.g. myserver.myhouse.com or 192.168.1.2.

Then enable/disable the security options for each power strip. If the "protected" checkbox is enabled, then any output names which are enclosed in round brackets e.g. "(FTP server)" will be disabled from being switched.

In the settings menu, a preferences password can be applied by selecting the "password required" checkbox and entering a password. The default password is "admin".

Once set up, the status and names of each output will be shown as on or off. To toggle each output, just press the appropriate output. Swipe left/right to move to other power strips, or up/down to pick from a list. Long press an output to power cycle it (if supported by your power strip/switch).

If supported by your power strip/switch, you can also get/set schedules for the outputs to turn on/off automatically.

Currently supported switches are:

IP9258 S/T/Ping

IP9258 SP

IP9258 HP

IP9258 WiFi

IP9258 W2

IP9223 K

IP9258 SX

IP9258 DS

IP9258 Pro

IP9258-1U

IP9258 xx

IP9255

IP9222

IP9212 Delux

IP9255 Pro

IP9255 W

IP9280

IP9820

IP 9858/DX

IP Sensor 9216

If yours isn't listed, please get in touch and we can add support.

*请与我联系，如果您有任何问题，而不是留下负面评论*

这个软件是为IP POWER 9258 /九千二百二十三分之九千二百二十二/9212分之9255/九千八百二十分之九千二百八/9216分之9858范围AVIOSYS网络控制的电源条（PDU的）。可以启动或关闭无限数量的设备远程使用您的Andr​​oid手机或智能手表在世界任何地方，日程事件的设备，以把自己和关闭，或电源循环设备，如路由器或服务器重新启动它。

各种可用AVIOSYS IP电源板的位置：http://bit.ly/10qUS9n

有一个完整的用户手册的位置：http://bit.ly/1a9oM5G

注：要访问PowerIP菜单使用手机的菜单按钮或按下屏幕上的三个点。请参阅手册第13.11，如果你不知道从哪里找到它。

对于PowerIP可能的应用是：

- 重启或者服务器或路由器的远程控制，如果它崩溃

- 把你的计算机上或关闭时，你出来，让您可以远程使用它

- 遥控防盗灯将它们打开或关闭，当你出去

- 遥控加热系统

- 用您的AVIOSYS电源板为远程可编程定时开关

- 家庭自动化应用

- 关闭电源的设备，以节省能源，而不是让它们处于待机状态

- 监控设备（与9212多彩）

- 控制的基础上，如环境光，计时器，定位事件设备（使用塔斯克，单独提供）

产品特点：

- 遥控器尽可能多的配电盘，只要你喜欢（包括AVIOSYS配电盘/开关的1，4端口和8端口变体）

- 运行宏来控制您的设备

- Android Wear支持

- 给每一个插线板昵称

- 用户可定义名称为每个可控输出

- 您可以通过电源板输出名称在安装过程中保存自己有给他们键入

- 组你经常使用的设备到您的收藏夹屏幕

- 您的主屏幕上创建快捷方式

- 获取和设置日程安排上的电源会自动去除本身就切换设备或关闭在预设时间

- 动力循环使用指定的延迟输出

- 阅读的9212多彩的输入状态

- 监控温度和电流

- 密码保护您的设定

- “保护”个人的功率输出，以防止用户意外断电的重要设备

- “保护”的输出功率，因此某些用户无法控制他们在所有

- 易于部署跨多个设备输入/输出服务器设置

- 使用Android的意图其他应用程序的集成

这很容易成立。刚进入服务器配置菜单，然后输入用户名，密码，服务器地址（IP地址或域名）和端口的每个配电盘/开关。对于服务器的地址，你不应该包括“HTTP”，而只是地址如： myserver.myhouse.com或192.168.1.2。

然后启用/禁用每个电源板的安全性选项。如果“保护”复选框被启用，则任何输出名称这是在圆括号如： “（FTP服务器）”将被从被切换禁用。

在设置菜单中，偏好密码可以通过选择“需要密码”复选框，并输入密码，才能使用。默认密码是“admin”。

设置完毕后，每个输出的状态和名称将作为打开或关闭显示。要切换每路输出，只需按下相应的输出。刷卡左/右移动到其他电源板，或向上/向下从列表中选择。长按输出功率循环它（如果您的电源板/交换机支持）。

如果您的电源板/交换机支持，您还可以获取/设置时间表输出开启/自动关闭。

目前支持的交换机是：

IP9258 S / T /平

IP9258 SP

IP9258惠普

IP9258无线网络

IP9258 W2

IP9223ķ

IP9258 SX

IP9258 DS

IP9258临

IP9258-1U

IP9258 XX

IP9255

IP9222

IP9212多彩

IP9255临

IP9255W¯¯

IP9280

IP9820

IP 9858 / DX

IP传感器9216

如果你没有列出，请与我们联系，我们可以添加支持。