***Android Wear supports TAP on watchface from v1.3.

So I removed all hack ways for implementing touch, and uses official API. As a result, swipe for opening a laucher is replaced with TAP on middle part of watchface.***

Using 4x4 blocks, you can customize your unique styled watchface.

Additonally, you can display a phones battery, weather, date, and change screen brightness, Want more? It provides its own launchers, instant timer, watch-on voice alarm, 10-to-hour voice alarm.

1. Unique 4x4 time system

(Please see playstore images.)

I'm sure this time-telling system is quite difficult, at least not easy. If you seek an easy one like having strong two-hands or big digits, FoFoClock is defintely not yours.

For normal watchface, the energy required for tell the time is almost zero. However, I bet you'll consume more energy for that with it. Whenever I try to tell the time with it, I feel my brain is working HARD and even a little tiresome, lol.

Are you brave enough to try this?

2. Cosmeticize your face using its styler app.

Using styler you can create/modify and send it to your wearable. You can use basic block/layer editing. But these are simple, so you'd better use a program like Gimp/Photoshop in PC.

3. Various tiny features.

- displays phone's battery percentage, connection state, weather information.

- provides its own 4-type launchers

- shows full date/day of week/AM-PM/time using its own block representation.

- can change screen brightness. Timeout is 2 seconds for tapping.

4. Unique features.

4.1 10-to-hour voice alarm.

Nowsdays, most of events, meetings, appointments, watching TV shows, etc begin at the exact hour like at 2PM.

Of coures if those were your main concern, then you would set normal alarm using phone or wearable.

But all litle stuffs can't be done like that.

For example, lets assume you have a plan to attend meeting or a mind to watch TV show at 1PM.

If phone or clock rings at 1PM sharp, it does recall you only the fact you are well ready for something or late for it. I think both are useless recall.

However, if clock rings at 10 to 1, at least you can be ready for something.

If you enable 10-to-hour voice alarm, every 10 minute before the hour, FoFoClock will say like "Hey its 10 to 2".

Your Android Wear device has no speaker. Don't worry, it vibrates or show animation, or speaks time using a Bluetooth audio device connected to your wearable. If not, your connected phone will say it.

4.2 Instant timer.

If you want to set timer for next short upcoming time, you may not want to using full featured timer app.

If that time is just after 1 minute, 3,5,10,15,30 minutes, you can just tap the FoFoClock repeatedly.

No need to browse timer/say anything, just tap tap...

This is instant timer, which means you are aware of upcoming time, and awake. So instant timer just does small animation, vibration and dies itself. No need for any STOP actions.

4.3 Watch-on voice alarm

If you enable this feature, whenever wearable's screen is turned ON, it says current time using BT audio device or your phone(timeout is 10 min.)

What for?

For example, car-driving environment is typical. You could watch your wearble, but would not want to as possible as you can. The situation you have a urge not to watch, but to listen for the time-telling.

Other use cases are up to you.

5. A few unstable actions now.

- Bluetooth/Wifi display is not robust now. As I know, there is no official API yet.

- If you have multiple wearalbe connected, then when you choose one after another, its model image in styler may be worongly displayed. If then, please turn off that device in Android Wear app, and then turn it on again.

*** Android Wear支持TAP从V1.3 watchface。

所以我删除了所有黑客的方式实现触摸，并使用官方的API。其结果是，刷卡开立laucher被替换塔上watchface的中间部分。***

采用4×4块，你可以定制你独特的风格的watchface。

Additonally，可以显示手机的电池，天气，日期和改变屏幕的亮度，想了解更多？它提供了自己的发射器，瞬间计时器，手表上的语音报警，10到小时的语音报警。

1.独特的四轮驱动系统时间

（请参见playstore图像。）

我敢肯定，这一次算命系统是相当困难的，至少不容易。如果你想寻找一个简单的人喜欢有强大的双手或大的数字，FoFoClock是defintely不是你的。

对于正常watchface，需要知道时间的能量几乎是零。不过，我敢打赌，你会消耗更多的能量与它。每当我试着告诉它的时候，我觉得我的大脑正在努力甚至有点讨厌，笑。

你有足够的勇气去尝试呢？

2.利用其造型的应用程序Cosmeticize你的脸。

使用美发造型器，您可以创建/修改，并将其发送给你的耐磨。您可以使用基本块/层编辑。但这些都是简单的，所以你最好在PC使用一个程序像瘸子/ Photoshop中。

3.各种微小的功能。

- 显示手机的电池百分比，连接状态，气象信息。

- 提供它自己的4型发射器

- 显示周/ AM-PM使用其自己的块代表性/时间的完整日期/天。

- 可以改变屏幕亮度。超时是2秒攻。

4.独特的功能。

4.1 10到小时的语音报警。

Nowsdays，大多数事件，会议，约会，看电视节目，等开始在像下午两点钟的确切小时。

系列课程，如果这些是你的主要关注点，那么你会用电话或耐磨设置正常报警。

但是，所有痘痘的东西是做不到这样的。

例如，让我们假设你有一个计划出席会议或心态来观看电视节目在下午1时。

如果手机或闹钟响起下午1点整，它不记得你只有其实你也准备好东西还是迟到了。我认为无论是无用的回忆。

但是，如果闹钟响起，在10比1，至少你可以准备的东西。

如果启用了10来小时的语音报警，一小时前，每隔10分钟FoFoClock会说像“嘿它的10比2”。

你的Andr​​oid Wear设备有没有喇叭。别担心，它振动或显示动画，或使用连接到您的可穿戴蓝牙音频设备说话的时间。如果没有，你连手机会说出来。

4.2即时计时器。

如果要设置定时器为下短期即将到来的时候，你可能不希望使用全功能的定时器应用程序。

如果这个时间正好是1分钟后，3,5,10,15,30分钟，你可以反复轻按FoFoClock。

无需浏览定时器/说什么，只是自来水塔...

这是瞬间的定时器，这意味着你意识到即将到来的时候，和清醒。因此，即时计时器只是做小动画，振动和死亡本身。无需任何停止行动。

4.3表式语音报警

如果启用此功能，当耐磨的屏幕打开时，它说，使用蓝牙音频设备或手机当前时间（超时时间为10分钟。）

做什么的？

例如，汽车行驶环境是典型的。你可以看你的wearble，但不希望尽可能即可。这种情况你有冲动不看，不过听的时间说明问题。

其他的用例是由你。

5.一些不稳定，现在的行动。

- 蓝牙/ WIFI显示不健壮了。据我所知，目前还没有官方的API呢。

- 如果您有多个wearalbe连接，那么当你选择了一个又一个，在造型的模型图像可能会worongly显示。如果这样，请关闭该设备在Android Wear应用程序，然后再次打开它。