This watch face reads your calendar and displays your events for the next twelve hours around the watch dial, using the same colors and visibility as your real calendar. You can configure it with the Android Wear app, on your phone, to choose from several different face styles, as well as turning on or off the second hand and the day/date block.
Note: this watch face runs on Android Wear watches (e.g., Huawei Watch, Motorola 360) and does NOT run on Samsung's Tizen watches, Pebble watches, or any other smartwatch devices.
Installation
Once you install CalWatch, it will show up in the list of watchfaces inside the Android Wear app on your phone as well as on your watch when you do a long-press on the screen. You can select it in either place. You can optionally use the Android Wear app on your phone to configure CalWatch (a "gear" image will appear over it after you make it the active watchface). This lets you do things like hide the second hand, enable the step counter, or change the style of the watch face.
A few cool features
• CalWatch displays stopwatch and timer data (in blue and orange, respectively) that it gets from the
XStopwatch & XTimer
app. Stopwatches have a blue minute and second hand. Timers have a yellow arc that goes from 100% to 0%.
• The second hand has a non-linear sweeping effect, similar to what you'll see in many European railroad clocks.
• Once your battery is below 33%, a yellow circle appears in the center. As the battery level drops, the circle grows. At 10% battery remaining, it turns red.
• CalWatch can also show your daily step count (rounded to the nearest 1000 steps) in the center. Enable it from the phone configuration panel.
• CalWatch works correctly with "ambient" mode, including "low-bit" mode on watches that require it.
• If you have a Moto 360 or other "flat tire" watch, CalWatch will adjust itself appropriately.
• The calendars events shown on the watch face are exactly the calendar events that are visible from the calendar app on your phone, with the same event times and colors. If you want to change what's visible on your watch or the colors for your events, just change them in your calendar, or touch the "Gear" icon in the Android Wear app on your phone, then select "Calendar settings". You can keep or remove any calendar from your watch without effecting your phone.
• The watch will display your calendar events within a twelve hour window. If, for example, it's 9:30am, you'll see events starting at 9:00am and lasting through 8:59pm. Any events that started before 9am but end in the visible region will still appear, but their start time will be clipped. Likewise, any events that start in the visible region but end afterward will have the end time clipped. This clipping is shown on the watch face with the ragged edge around events at the clipping line.
• CalWatch ignores "all day" or any event that would make a full circle around the dial. This gives you more room to see the events that start and end in the next 12 hours.
Permissions and privacy
When you install CalWatch, Android will report that CalWatch needs to "read calendar events plus confidential information". The only thing that CalWatch does, and the only permission it requests, is to read your calendar. Without that, it can't do its job. (On Android 6 "Marshmallow", it will now ask you directly for this permission.)
CalWatch does not transmit your personal information to anybody!
The only circumstance where CalWatch makes a network connection is if it crashes. You'll then have the opportunity to send crash feedback to the developer. Even in this case, your private calendar data never leaves your device.
这款腕表的脸读取您的日历,并显示您的事件围绕表盘未来十小时,使用相同的颜色和知名度为你的真实的日历。您可以使用Android Wear应用配置它,您的手机上,从几个不同的面貌款式可供选择,以及打开或关闭秒针和天/日期块。
注:此表的脸Android Wear上的手表(例如,华为手表,摩托罗拉360),并没有对三星Tizen运行手表,手表卵石,或任何其他智能手表设备上运行
安装
一旦你安装CalWatch,它会显示在您的手机上,以及手表上的Android Wear应用程序内watchfaces列表中,当你在屏幕上做一个长按。你可以在任何地方选择它。您可以选择使用手机上的Android Wear应用配置CalWatch(你做它后主动表盘一个“齿轮”的形象将出现在它)。这可以让你不喜欢的东西隐藏秒针,让计步器,或改变表盘的样式。
一些很酷的功能
&公牛; CalWatch显示秒表和计时器的数据(在蓝色和橙色,分别)它从
XStopwatch得到&XTimer
的应用程序。秒表有一个蓝色的分针及秒针。定时器具有黄色弧从100%变为0%。
&公牛;秒针具有非线性效应扫,类似于你会发现在许多欧洲铁路时钟看。
&公牛;一旦电池电量低于33%,一个黄色圆圈出现在中心。由于电池电量下降,圆增长。在10%的电池余量,它会变成红色。
&公牛; CalWatch也可以显示在中心的每日步数(四舍五入至最接近的1000步)。从手机配置面板启用它。
&公牛; CalWatch正常工作与“环境”的模式,包括对需要它的手表“低位”模式。
&公牛;如果你有一个摩托360或其他“爆胎”的手表,CalWatch会适当地调整自己。
&公牛;在手表表面显示的日历事件都完全是从您的手机上的日历应用程序中可见的日历事件,用同样的事件时间和颜色。如果你想改变什么对你的手表或您事件的颜色可见,就改在您的日历,或触摸手机上的Android Wear应用中的“齿轮”图标,然后选择“日历设置”。您可以保留或删除您的观看任何日历,但不会影响您的手机。
&公牛;手表将显示一个十二小时的窗口内的日历事件。如果,例如,它的上午9:30你会看到活动开始于上午九时正至下午8时59分持续。即上午09时结束,但在可见光区仍将出现之前启动的任何活动,但它们的开始时间将被裁剪。同样,启动在可见光区,但结束之后将具有结束时间的任何事件裁剪。这条新闻显示在表盘与裁剪线周围的活动衣衫褴褛的边缘。
&公牛; CalWatch忽略“了一整天”,或将使得表盘周围一整圈的任何事件。这给你更多的空间来看到启动,并在接下来的12小时结束事件。
权限和隐私
当您安装CalWatch,Android将报告CalWatch需要“读取日历活动和机密信息”。该CalWatch做的唯一一件事,它要求仅允许,是阅读您的日历。如果没有,它不能做自己的工作。 (在Android 6“棉花糖”,现在它将直接问你这个权限。)
CalWatch不传输您的个人信息提供给任何人!其中CalWatch建立网络连接的唯一情况是,如果它崩溃。然后,你必须崩溃的反馈发送给开发者的机会。即使在这种情况下,您的私人日历数据永远不会离开你的设备。